Pain treatment
BioStim INF digital Interferential stimulator
Portable 2-polar and 4-polar interferential device
BioStim INF offers 3 pre-programmed sweeps;
- 1-10 Hz, used for Edema Reduction,
- 80-150 Hz used for Pain Relief
- 1-150 Hz for total treatment allow for easy set up and patient instruction
BioStim INF offers bipolar stimulation using two electrodes where the interferential stimulation is already “mixed” or Full Interferential stimulation with the use of four electrodes.
BioStim INF has a timer for the desired treatment time and comes with a wall adaptor or operates on four AA batteries.
BioStim INF comes standard with two color lead wires, electrodes (4), batteries, instruction booklet, carrying case and wall adaptor.
BioStim INF set includes:
- 1 BioStim INF Interferential stimulator
- 4 Electrodes (50x50mm.)
- 2 Lead wires
- 4 Batteries
- 1 Manual
- 1 Carrying pouch
More info
BioStim INF Interferential Stimulator
Size | 82 mm x 70 mm x 45mm |
Weight | 226 grams |
Carrier Frequency | 4000 Hz, fixed |
Interference Frequency | 4001-4150 Hz, adjustable |
Interference Difference Frequency | 1-150 beats per second, adjustable |
Bipolar Stimulation | Channel 1 |
Output Current | 0-66 milliamps peak to peak with 500 ohm load |
Output Voltage | 0-33 Volts peak to peak with 500 ohm load |
Waveform | Pulsed Sine Wave |
Pulse Width | 125 microseconds for each phase |
Four Frequency Shifts | Continuous, 1-10 Hz over 6 seconds and 80-150 Hz over 8 seconds and 1-150 Hz over 10 seconds |
Low Battery Indicator | Indicates when batteries are low |
Max. Charge per Cycle | 12.5 microcoulombs |
Power Supply | 4 AA batteries or Wall Adaptor |
Tolerance | +/-1% |
Output parameters are across a 500 ohm resistance. | |
